ROOF VENTILATION PRODUCTS GALLERY
Home / Products Gallery / Roof Ventilation Products Gallery
HEAT
During summer months temperatures in roof spaces can reach as high as 60°c.This heat radiates downwards causing discomfort in living areas and forcing air conditioners to work harder. Even the effectiveness of ceiling insulation can be reduced by the additional heat load.
MOISTURE
During the colder months, water vapour from showers and cooking is drawn into roof spaces and can condense to form up to 12 litres of moisture per day. This can render insulation ineffective, cause mildew on walls and ceilings and contribute to a damp environment.
 |
 |
Winter |
Summer |
Problems associated with heat and moisture in the roof can be avoided by the installation of adequate ventilation systems. CSR Edmonds manufactures a range of quality ventilators for residential, commercial and industrial including:
WINDMASTER TURBINE VENTILATOR 300MM: 
A 300 mm throat, spherical vane ventilator constructed primarily from aluminium. Incorporating the first rotating shaft technology on the market. Two precision full steel bearings are located in a bottom bearing assembly. This design allows the bearings to be easily replaced. One unit is suitable for upto 90m3. Malleable base plate suits installation on most roof types. Available in an extensive range of colours.
TURBOBEAM TURBINE VENTILATOR 250MM: 
TurboBeam is the first turbine ventilator to provide roof space ventilation and enable natural light to enter the attic space. Also ideal for use on sheds. A world unique product. Malleable base plate suits installation on most roof types.
SUPAVENT TURBINE VENTILATOR 250MM:
A 250mm throat, vertical vane ventilator constructed primarily from ASA polymer. The ASA is UV stable and has excellent hail resistance. The vertical vane configuration offers greater starting torque at lower wind speeds. Two full stainless steel bearings come with a fifteen year warranty. The vent design ensures the two bearings are always in alignment, thereby guaranteeing smooth, quiet and efficient operation. One unit is suitable for up to 90m3. Malleable base plate suits installation on most roof types. Available in 16 Colours.
MAESTRO 12V MECHANICAL ROOF VENTILATOR 300MM:
A 12 Volt DC thermostat controlled powered roof ventilator that does not need an electritian for connection. The unit plugs directly into a power point. Very low operational noise and energy cost is less than $A7 per annum. The Maestro extracts 130 l/s. Best suited to situations where constant or controllable ventilation is required. Ideal for improving the efficiency of ducted air conditioning systems. Available in 16 Colours.
HURRICANE INDUSTRIAL TURBINE VENTILATOR / 100-900MM:
Hurricane is designed and manufactured in Australia for harsh operating conditions. It is suitable for industrial, commercial and community buildings, including schools. Throat sizes available include 100mm, 150mm, 300mm, 400mm, 450mm, 500mm, 600mm, 700mm, 800mm, and 900mm.
ECOPOWER TURBINE/MECHANICAL VENTILATOR 150, 400 & 700MM:
ecoPOWER is the world’s first true hybrid ventilator, capable of operation seperately under both wind and power energy sources. The energy source is electronic commutating motor technology located in the top of the ventilator.This gives energy efficiency levels previous not seen from powered ventilators. The ultimate in ‘green’ technologies. Mechanical operation can be controlled by thermostat.
COMPANY DETAILS
Phone: 07 5439 0990
Fax: 07 5439 0770
Address:
26 Beerwah Parade
Beerwah, Sunshine Coast
QLD 4519, Australia
Postal Address:
PO BOX 147,
Mooloolaba, Sunshine Coast
QLD 4557, Australia
What’s New at Ascent
NSW Lic: #187568C
REQUEST FOR QUOTE
COLORBOND COLOURS
