STRAMIT® C-CLAD 200

Home / Products Gallery / Roofing & Wall Cladding / Stramit C-Clad 200

SELECTION & SPECIFICATION

FEATURES:

Finish – choice of plain or swaged finish.
Versatility – can be used in either vertical or horizontal applications.
Simple Installation – “fix, hinge and cover and fix again” procedure.
203mm Cover – ensures solid fixing and very high wind load performance.
Interlocking Panels – ensure weatherseal at all joints.
Secret Fixing – fasteners are concealed from view to give a smooth appearance

APPLICATIONS:

Stramit® C-Clad 200 wall sheeting has an appealing smooth faced finish with concealed fixings, designed for feature walling and is effective in both horizontal and diagonal applications. The 203 fastener spacing gives enhanced wind resistance.

APPEARANCE:

Plain Stramit® C-Clad 200 wall sheeting has a wide flat face ideal for many applications. However all roll-formed products with wide flat areas exhibit a subtle wave pattern (known as oil-canning) when viewed from an angle. Whilst un-noticeable in many applications this phenomena may prove less satisfactory in applications where a very flat or uniform finish is expected. Please contact your Stramit representative to discuss particular applications.

MATERIAL:

Stramit® C-Clad 200 wall sheeting is a cold roll formed steel product in G300 base material (300 MPa minimum yield stress) with a Zincalume® substrate in accordance with AS1397, and Colorbond® coating is available in a limited range of colours.

STRAMIT® C-CLAD 200 WALL SHEETING - SHEETING MASS (kg/m2 of roof area)
thickness BMT	Zincalume®	Colorbond®

0.55 (Swaged)	5.91	6.03
0.70 (Plain)	7.48	7.56

COMPANY DETAILS

Phone: 07 5439 0990
Fax: 07 5439 0770

Address:
26 Beerwah Parade
Beerwah, Sunshine Coast
QLD 4519, Australia

Postal Address:
PO BOX 147,
Mooloolaba, Sunshine Coast
QLD 4557, Australia

What’s New at Ascent

QBSA Lic: #1069230
NSW Lic: #187568C