STRAMIT SPEED DECK ULTRA®

Home / Products Gallery / Roofing & Wall Cladding / Stramit Speed Deck Ultra®

SELECTION & SPECIFICATION

AUSTRALIAN DESIGN AWARD:

Stramit Speed Deck Ultra® decking, winner of a 1995 Australian Design Award for “using the properties of high tensile steel to their best advantage through good design practices”.

APPLICATIONS:

The visual appeal, strength, wide cover, light weight and weather resistance of Stramit Speed Deck Ultra® decking make it perfect for all commercial roofing applications. Its excellent strength and ease of assembly allow for long, economical spans.The large water-carrying capacity and weather-tightness permit very low roof pitches, leading to economies in the building structure. Stramit Speed Deck Ultra® decking may also be used for domestic applications.

APPLICATIONS:

Stramit Speed Deck Ultra® decking is manufactured from hi-tensile G550 colour coated steel or zinc-aluminium alloy coated steel. In some locations galvanised and severe environmental colour coated steel may be available by arrangement. Colour coated steels are in accordance with AS2728 – Category 3 and, for the substrate, with AS1397. Zinc-aluminium alloy coated AZ150 and galvanised Z450 conform to AS1397. Stramit has a comprehensive range of colours as standard. Ask your nearest Stramit location for colour availability.

STRAMIT SPEED DECK ULTRA® DECKING –
SHEETING MASS (kg/m² of roof area)
thickness bmt	Zincalume	Colorbond	Galvanised
0.42mm	4.66	4.74	5.07
0.48mm	5.29	5.37	5.70

MATERIALS:

Stramit Speed Deck® 500 decking is manufactured from hi-tensile G550 BlueScope Steel COLORBOND® XRW steel or BlueScope Steel ZINCALUME® steel. In some locations galvanised and Colorbond® Ultra steel may be available by arrangement. Colorbond® XRW (and Ultra) is in accordance with AS2728 – Category 3 and, for the substrate, with AS1397. Zincalume® AZ150 and galvanised Z450 conform to AS1397. Stramit has a comprehensive range of Colorbond® colours as standard. Refer to the BlueScope Steel Colorbond® 18 colours chart available from Stramit, and ask your nearest Stramit location for colour availability.

STRAMIT SPEED DECK® 500 DECKING - SHEET MASS (kg/m2 of roof area)
	Zincalume®	Colorbond®	Galvanised
0.42mm BMT	4.72	4.80	5.14
0.48mm BMT	5.36	5.44	5.78
0.60mm BMT	6.64	6.72	7.06

ADVERSE CONDTIONS:

Stramit Speed Deck® 500 decking will give excellent durability in almost all locations. With all of its fastenings protected beneath the decking, Stramit Speed Deck® 500 decking can be expected to outlast through-fixed roofing. It is however important to choose the correct coating for each application environment. The table below shows the suitability of coating types for different exposure conditions.

suitability of coating type	site exposure condition
	benign	moderate	severe	very severe
Zincalume® AZ150		?	?
Galvanised Z450		?
Colorbond® XRW			?
Colorbond® Ultra	N/A	N/A		?

? Question marks indicate conditions where durability may be diminished, depending on the particular application.

The approximate site exposure conditions in the table above are defined below.

site exposure condition	distance of site from
	rough active surf	calm, still salt water	industrial emission	fossil fuel combustion
benign	1000m +	100m +	500m +	500m +
moderate	400m-1000m	0-100m	250m-500m	250m-500m
severe	100m-400m	N/A	100m-250m	100m-250m
very severe	0-100m	N/A	0-100m	0-100m

The suitability and exposure tables above are guidelines only; conditions will vary from site to site. If in any doubt about the choice of coating for a particular application contact your nearest Stramit office for advice.

COMPATIBILITY:

All building products need to be checked for compatibility with adjacent materials. These checks need to be for both direct contact between materials, and where water runs from one material to another. The following guidelines generally avoid material incompatibility:

• For Zincalume, Colorbond XRW and galvanised roofs avoid copper, lead, green or treated timber, stainless steel and mortar or concrete.

• In addition galvanised roofs should not receive drainage from aluminium or any inert materials, such as plastics, glass, glazed tiles, Colorbond and Zincalume.
  

TESTING:

Stramit has in-house, purpose built, testing equipment used to design, develop and improve products for the Australian market. In addition many Stramit products are tested or witnessed by independent organisations.

These include:

• Cyclone Structural Testing Station
  (James Cook University)
  
  

• The University of Sydney
  
  

• Monash University
  
  

• CSIRO
  
  

• University of Queensland
  
  

• University of Technology, Sydney

This ongoing research and development activity ensures that Stramit remains at the forefront of innovation, design and consumer information.

ARCHITECTURAL SPECIFICATION:

The roofing/walling shall be 0.42 (0.48 or 0.60) mm BMT Stramit Speed Deck® 500 decking, in continuous lengths with trapezoidal ribs 41mm high, spaced at 250mm centres. Sheeting material shall be protected steel sheet to AS1397 with a minimum yield stress of 550MPa (Grade G550) and an AZ150 zinc-aluminium coating with or without an oven baked paint film of selected colour.The sheeting shall be fixed to the purlins/girts in accordance with the manufacturer's recommendations. Suitable fixing screws in accordance with Australian Standard AS3566, Class 3, shall be used at every rib at every support. Sheets shall be laid in such a manner that the approved side lap faces away from the prevailing weather. A minimum of 50mm shall be provided for projection into gutters. Flashings shall be supplied in compatible materials as specified, minimum cover of flashing shall be 150mm. All sheeting shall be fixed in a workman like manner, leaving the job clean and weathertight. Repair minor blemishes with touch-up paint supplied by the sheeting manufacturer. All debris (nuts, screws, cuttings, filings etc.) shall be cleaned off daily.

Phone: 07 5439 0990
Fax: 07 5439 0770

Address:
26 Beerwah Parade
Beerwah, Sunshine Coast
QLD 4519, Australia

Postal Address:
PO BOX 147,
Mooloolaba, Sunshine Coast
QLD 4557, Australia

What’s New at Ascent

• Company News
• Testimonials

QBSA Lic: #1069230
NSW Lic: #187568C

REQUEST FOR QUOTE

Residential Industrial Commercial Re-Guttering Ventilation Rainwater Tanks Re-Roofing New Roofing

COLORBOND COLOURS